A pool technician kneels at the pool edge and checks a water sample with a liquid test kit.

Water problems

Why is my pool cloudy?

Cloudy pool water is often a filtration or chemistry problem, not a reason to keep adding products. This guide helps you look at the filter, test the water, and decide whether you are dealing with dull water, early algae, or something that needs a technician.

In this guide

  1. Safety notes
  2. Common reasons a pool looks cloudy
  3. Step-by-step checks
  4. When to call a pro
  5. Questions owners often ask

Common reasons a pool looks cloudy

Cloudy water means something in the water is scattering light. The usual causes are a filter that is dirty, undersized, or not running long enough; chemistry that is out of range, especially high pH; early algae; or fine particles after a shock or a heavy bather load. Metals or very high calcium can also dull the water, though those problems often show as staining or scale as well.

Step by step

  1. Look closely at the water and the filter

    Note the color and whether you can see the main drain or the floor. Check that the pump is running, the baskets are not packed, the water level is high enough to skim, and the filter pressure is not unusually high. A system that is not circulating will not clear on its own.

  2. Test the water

    Use a reliable test kit and write down sanitizer, pH, and alkalinity. Follow the chemistry guide to bring those numbers into a normal range. Do not add a pile of products before you know what the water already has.

  3. Give the filter a chance to work

    Clean a dirty cartridge, backwash a sand or DE filter if the pressure has risen the amount the manual calls for, and empty the pump and skimmer baskets. Then run the pump long enough to turn the water over, often most of the day on a cloudy pool. Many dull pools clear once filtration is actually happening.

  4. Adjust chemistry and brush

    Brush the walls, steps, and floor so particles are in the water for the filter to catch. If the water is green, stop treating it as a simple cloudy-water problem and use the green pool cleanup guide.

  5. Stop and reassess if it is not clearing

    If the water stays milky after the filter is clean, the pump is running, and the chemistry is in range, you may be dealing with very fine particles, a failing filter, or a metals problem. Adding clarifier after clarifier, or more shock on top of shock, often makes it harder to see what is going on. That is a good time to call a technician.

When to call a pro

Call a pool technician if the pump or filter cannot run, if the water stays cloudy after careful testing and filtration, if you suspect metals or a damaged filter, or if you are not comfortable using the chemicals involved. Call as well if the water is a stubborn green or black.

Questions owners often ask

Is cloudy water the same as a green pool?

Not always. Green often points to algae. Cloudy or milky water can also come from a dirty or undersized filter, short run time, high pH, or leftover particles after a shock. If the water is clearly green, use the green pool cleanup guide.

Should I add a clarifier right away?

Not first. Test the water and check the filter and run time. A clarifier can help some fine-particle problems after circulation is working, but it will not fix a filter that cannot clean or chemistry that is far out of range.

Can I swim in a cloudy pool?

If you cannot see the bottom clearly, stay out. You also cannot judge depth or a person in the water. Wait until the water is clear and the sanitizer and pH are in a normal range.

Why did the water go cloudy after I shocked it?

Dead algae and leftover particles can cloud the water for a while. Keep the filter running, clean it as it loads, and let it catch up. If the cloudiness does not fade, test again and look at the filter.