Seasonal care
How to close a pool for winter
Closing a pool is a winterizing job: clean the water, bring the chemistry into range, protect the pump and lines from freezing, and put the cover on so debris stays out until spring. This guide is for a typical residential pool in a climate that actually freezes. In frost-free areas, many pools stay open all year.
In this guide
Step by step
-
Decide whether your climate actually needs a close
Closing a pool is a winterizing job. It matters most where temperatures drop below freezing. In those climates, water left in a pump, heater, or line can freeze and crack the equipment.
In frost-free or nearly frost-free areas, including much of South Florida and many desert markets, pools often stay open all year. In that case, this guide is optional. If you still want a quieter off-season, you can reduce run time and keep up with testing rather than fully winterizing.
-
Clean the pool thoroughly
A dirty close is a messy open. Skim the surface, brush the walls, steps, and waterline, vacuum, and empty the skimmer and pump baskets. If leaves go under the cover, they sit for months, stain surfaces, and make spring chemistry harder.
-
Test and balance the water
Test sanitizer, pH, and alkalinity, and bring them into a normal range before you shut the system down. Follow the pool chemistry guide and the labels on any product you add. If you use a winterizing algaecide or a special winter kit, use only what the label allows, and never mix it with other chemicals in a bucket or skimmer.
-
Set the water level for your cover and climate
Some solid safety covers and some freeze-protection methods ask you to lower the water below the skimmer or tile line. Others want the water left close to normal. Follow your cover manual and the practice used for your type of pool. Do not drain the pool empty unless a technician has confirmed it is safe for your shell or liner and for the water table in your yard.
-
Protect the pump, filter, heater, and lines
Turn the system off at the timer and the breaker before you open lids or unions. Drain water from the pump, filter, and heater if that is how those units are meant to be winterized. In freezing climates, lines are often blown out and plugged; some systems instead use a freeze-protection mode that still needs power. Follow the manuals for your equipment, and do not assume a neighbor’s method matches yours.
If you are not sure how your pad was designed to be winterized, stop and hire a technician rather than loosening unions at random.
-
Install the cover correctly
Put the cover on so rain, leaves, and debris stay off the water as much as the cover allows. Secure it with the anchors, straps, or water bags it was designed to use. Pump standing water off a solid cover during the winter so the weight does not sit on the water or the deck hardware.
When to call a pro
Call a pool technician if you have never winterized this equipment, if the pool has a complicated set of lines or a spa, if you find a leak, or if a freeze is already in the forecast and the system is still full of water. Call as well if the water is green and you would rather not handle a cleanup and a close in the same week. See the green pool cleanup guide if the water is already heavy with algae.
Questions owners often ask
Do I need to close a pool in a warm climate?
Not always. In places that rarely freeze, many owners keep the pool circulating all year and skip a formal close. If you do close, the equipment still needs to be shut down and covered so it is not damaged by sitting unused.
When should I close the pool?
In a freezing climate, close before the first hard freeze, not after the plumbing has already been exposed to ice. In the northern United States that is often in the fall, once you are done swimming.
Should I add antifreeze to the lines?
Only if that is the winterizing method for your plumbing and the product is labeled for that use. Follow the label, and do not pour antifreeze into the pool water as a substitute for draining or blowing the lines.
Can I just stop the pump and put the cover on?
In a freeze climate, that can leave water in the pump, filter, heater, and lines, which can crack when it freezes. Clean, balance, and winterize the equipment first.